How to Use Wisedry ColorDot Desiccant

With use, Wisedry ColorDot Desiccant absorbs moisture from the air and loses its drying power. To make it active again, you'll need to remove the absorbed moisture by heating it.

 

When to Reactivate

Color: When the indicator dot turns from blue to pink, a packet is saturated and requires reactivation.

* lf it is slightly pink, it is recommended to use the following weighing method to determine saturation.

Weight: When a packet gains over 30% of its original weight, it is saturated and requires reactivation.

Kindly Note: Due to product properties, the absorption duration varies with humidity. The speed of the indicator dot changing from blue to pink does not reflect product performance. It is recommended to use the weighing method to determine the saturation level if you are unsure.

 

Reactivate by Microwave (Recommended)

Reactivation time varies depending on the type of microwave, the amount of packets, and the saturation level.

NOTE

  • Before reactivation, read the "When to Reactivate" section to ensure the packets are saturated and avoid overheating damage.
  • When reactivating, strictly follow the "THIS SIDE DOWN" sign on the packet (dot side up) or else damage may occur.
  • Do not pile the packets when reactivating.

 

Step 1. For best results, directly spread the packets in the microwave evenly (with no additional dishes or plates to hold them).

CAUTION: The packets will heat up rapidly during reactivation. Make sure your microwave turntable is high-temperature resistant thick glass. Otherwise, remove it before reactivation. If not removable, use an oven instead or damage may occur.

 

Step 2. Reactivate according to the settings.

 

For 100g packets:

Microwave Output Power Level Amount  Time
700W High/100% 100g x 1 pack 3+3 min

100g x 2 packs 4+4 min
700W Mid-high/70% 100g x 1 pack 4+4 min


100g x 2 packs 5+5 min
  • Recharge in 2 times. Must let it cool before the second recharge.

 

For 200g packets:

Microwave Output Power Level Amount  Time
700W High/100% 200g x 1 pack 4+4 min
1000W Mid-high/70% 200g x 1 pack 5+5 min
  • Recharge in 2 times. Must let it cool before the second recharge.

* For microwaves of different outputs, adjust the time accordingly.

* Reactivation is complete when the pink dot returns to blue / a packet weighs back to 100 grams.

 

Reactivate by Oven

 

Step 1. Evenly spread the packets in an appropriate container (recommend a shallow metal baking sheet) and put it in the oven.

 

Step 2. Heat at 150℃ / 300°F.

 

For 100g packets:

Amount Temperature Time
100g x 1 pack 150℃/300℉ 30+30 min
100g x 2 packs 150℃/300℉ 30+30 min
100g x 3 packs 150℃/300℉ 35+35 min
  • Recharge in 2 times. Must let it cool before the second recharge.

 

For 200g packets:

Amount Temperature Time
200g x 1 pack 150℃/300℉ 30+30 min
200g x 2 packs 150℃/300℉ 30+30 min
  • Recharge in 2 times. Must let it cool before the second recharge.

 

Tips

  • Do not reactivate unused new desiccant packets.
  • Do not put in water as the desiccant will fail to work permanently.
  • A packet will retain absorbed liquids internally to keep stored items dry and prevent damage from seepage.
  • If the indicator dot's color-indicating function is affected after multiple uses, weigh the packet to check its saturation level.

CAUTION

  • Do not eat or inhale.
  • Keep out of reach of children and pets.
  • Packets will be hot after reactivation. Do not touch with bare hands.
  • If a packet is broken, throw away.
  • If swallowed, seek immediate medical attention.